Yealink T5 Series

Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones
406
1-PAI
2-PAI-FROM
3-PRID-PAI-FROM
4-PAI-RPID-FROM
5-RPID-FROM
6-PREFERENCE, the phone uses the custom priority order for the sources of caller identity (configured by
the parameter “sip.cid_source.preference”).
Default 0
Web UI Account->Advanced->Caller ID Source
Parameter
account.X.cid_source_privacy
[1]
<MAC>.cfg
Description
It enables or disables the phone to process the Privacy header field in the SIP message.
Note: The priority order: PPI>Privacy>PRID/PAI/From
Permitted
Values
0-Disabled, the phone does not process Privacy header.
1-Enabled, the phone screen presents anonymity instead if there is a Privacy: id in the INVITE request.
Default 1
Parameter
account.X.cid_source_ppi
[1]
<MAC>.cfg
Description
It enables or disables the phone to process the P-Preferred-Identity (PPI) header in the request message
for caller identity presentation.
Permitted
Values
0-Disabled, the phone does not process the P-Preferred-Identity (PPI) header.
1-Enabled, the phone presents the caller identity from the P-Preferred-Identity (PPI) header.
Default 0
Parameter sip.cid_source.preference <y0000000000xx>.cfg
Description
It configures the priority order for the sources of caller identity information. The headers can be in any
order.
Note: Yealink phones can derive caller identity from the following SIP headers: From, P-Asserted-Identity
(PAI), P-Preferred-Identity and Remote-Party-ID (RPID). It works only if “account.X.cid_source” is set to 6
(PREFERENCE).
Permitted
Values
String
Default P-Preferred-Identity, P-Asserted-Identity, Remote-Party-ID, From
Parameter
account.X.cp_source
[1]
<MAC>.cfg
Description It configures the identity of the callee according to the response message.
Permitted
Values
0-PAI-RPID
1-Dialed Digits
2-RFC4916, the caller sends the SIP request message which contains the from-change tag in the Sup-
ported header. The caller then receives an UPDATE message from the server, and displays the identity in
the “From” header.