Chapter 3 PERFORMING MEASUREMENTS
3-25
3. Locate the cursor to “2^13” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the average time.
5. Press [F4] (DONE) to register the changes made to the measurement
conditions.
Influenced by other measurement conditions, the actual averaging time may be
shorter than the set period.
When changing the condition for two or more items, it is recommended to change
the condition for each item first and then press [F4].
Refer to the notes given on changing the measurement conditions (page 3-50).
TIP
Refer
Caution
To Next Page
Loading...
Need help?
General
