YOKOGAWA AQ7260 OTDR User Manual

Chapter 3 PERFORMING MEASUREMENTS
3-29
3. Locate the cursor to “5k MODE” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the data size.
5. Press [F4] (DONE) to register the changes made to the measurement
conditions.
When changing the condition for two or more items, it is recommended to change
the condition for each item first and then press [F4].
Refer to the notes given on changing the measurement conditions (page 3-50).
TIP
Refer

YOKOGAWA AQ7260 OTDR Specifications

General

Brand	YOKOGAWA
Model	AQ7260 OTDR
Category	Measuring Instruments
Language	English