YOKOGAWA AQ7260 OTDR User Manual

Chapter 3 PERFORMING MEASUREMENTS
3-65
•The cursor can move between the measurement start and end points. However, at
the measurement start point, the cursor will not move any more even if the rotary
knob is rotated counter-clockwise. Similarly, it will not move even if the rotary knob
is rotated clockwise at the measurement end point.
Holding down the rotary knob will allow you to change the cursor speed.
•If a trace is currently displayed, the cursor will move along it.
TIP

YOKOGAWA AQ7260 OTDR Specifications

General

Brand	YOKOGAWA
Model	AQ7260 OTDR
Category	Measuring Instruments
Language	English