Chapter 3 PERFORMING MEASUREMENTS
3-90
Changing the File Operation Setting
This instrument allows various file operations (saving, recalling, deleting, printing,
copying).
This section explains how to change the file operation .
♦ Example: “COPY” → “SAVE”
1. Press [F1] (FILE OPERATION).
A selection window will appear.
*: Indicates the default setting.
2. Locate the cursor to “SAVE” by using the rotary knob or [S] / [T].
3. Press [ENTER] to register the change made to the file operation setting.
TIP
*SAVE Saves the measured data.
RECALL Recalls a saved file.
DELETE Deletes a saved file.
PRINT Recalls a saved file and prints its data.
Selectable
file operations
COPY Copies a saved file to another drive or directory.
To Next Page
Loading...
