Chapter 6 FILE OPERATION
6-16
Selecting a Print Object
The print object can be changed as explained below.
♦ Example: “TRACE + LIST” → “TRACE”
The print object cannot be changed if “.LST” has been selected as the file type.
10. Locate the cursor to “PRINT OBJECT” by using the arrow key.
11. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
12. Locate the cursor to “TRACE” by using the rotary knob or [S] / [T].
13. Press [ENTER] to register the change made to the print object setting.
Caution
TIP
*TRACE + LIST
Prints both the trace and event list.
TRACE Prints the trace only.
Selectable
objects
LIST Prints the event list only.
To Next Page
Loading...
Need help?
General
