Chapter 7 USING USEFUL FUNCTIONS
7-14
6. Press [ENTER].
The following window will appear.
7. Locate the cursor to “START No.” by using the rotary knob or [S] / [T].
“START No.” is already highlighted when this window appears.
8. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
9. Enter the desired start No.
10. Locate the cursor to “SUB No.” by using the rotary knob or [S] / [T].
TIP
TIP
Selectable
start No.
*001
to
999
(1 step)
To Next Page
Loading...
