Chapter 2 CHANGING SYSTEM SETTINGS
2-26
3. Change the year.
3-1. Locate the cursor to “YEAR” by using the rotary knob or [W] / [X].
3-2. Press [ENTER].
A selection window will appear.
3-3. Locate the cursor to “2005” by using the rotary knob or [S] / [T].
3-4. Press [ENTER] to register the change made to the year.
4. Change the minute.
4-1. Locate the cursor to “MINUTE” by using the rotary knob or [W] / [X].
4-2. Press [ENTER].
A selection window will appear.
4-3. Locate the cursor to “20” by using the rotary knob or [S] / [T].
4-4. Press [ENTER] to register the change made to the minute.
The month, day and hour can be changed in the same way as year and minute.
5. Press [F1](DONE) to register the change made to the date/time .
The change will not be registered if [ESC] is pressed instead of [ENTER].
Caution
TIP
To Next Page
Loading...
