ZyXEL Communications GS1920v2 Series User Manual

Chapter 30 Link Aggregation
GS1920v2 Series User’s Guide
164
30.3 Link Aggregation Setting
Click PORT > Link Aggregation > Link Aggregation Setting to display the screen shown next. See Section
30.1 on page 161 for more information on link aggregation.
Figure 111 PORT > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 75 PORT > Link Aggregation > Link Aggregation Setting
LABEL DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
Group ID The field identifies the link aggregation group, that is, one logical link containing multiple ports.
Active Select this to activate a trunk group.

ZyXEL Communications GS1920v2 Series Specifications

General

Brand	ZyXEL Communications
Model	GS1920v2 Series
Category	Switch
Language	English