Chapter 31 Link Layer Discovery Protocol (LLDP)
GS1920v2 Series User’s Guide
176
31.4  LLDP Remote Status
This screen displays a summary of LLDP status for each LLDP connection to a neighboring Switch. Click 
PORT > LLDP > LLDP > LLDP Remote Status to display the screen as shown next.
Figure 119   PORT > LLDP > LLDP > LLDP Remote Status
The following table describes the labels in this screen.
Network Policy 
TLV
This displays a network policy for the specified application.
•Voice
• Voice-Signaling
•Guest-Voice
• Guest-Voice-Signaling
• Softphone-Voice
• Video-Conferencing
•Streaming-Video
• Video-Signaling
Device Type 
TLV
Device Type – This is the LLDP-MED device class. 
The Zyxel Switch device type is:
• Network Connectivity
Location 
Identification 
TLV
This shows the location information of a caller by its ELIN (Emergency Location Identifier 
Number) or the IETF Geopriv Civic Address based Location Configuration Information (Civic 
Address LCI).
• Coordinate-based LCI – Latitude, longitude and altitude coordinates of the location 
Configuration Information (LCI)
• Civic LCI – IETF Geopriv Civic Address based Location Configuration Information
• ELIN – (Emergency Location Identifier Number)
Table 78   PORT > LLDP > LLDP > LLDP Local Status > LLDP Local Port Status Detail (continued)
LABEL DESCRIPTION
Table 79   PORT > LLDP > LLDP > LLDP Remote Status
LABEL DESCRIPTION
Index The index number shows the number of remote devices that are connected to the Switch. 
Click on an index number to view the detailed LLDP status for this remote device in the LLDP 
Remote Port Status Detail screen.
Local Port This is the number of the Switch’s port that received LLDPDU from the remote device.
Chassis ID This displays the chassis ID of the remote device associated with the transmitting LLDP agent. 
The chassis ID is identified by the chassis ID subtype. For example, the MAC address of the 
remote device.
Port ID This is an alpha-numeric string that contains the specific identifier for the port from which this 
LLDPDU was transmitted. The port ID is identified by the port ID subtype.