Chapter 67 MAINTENANCE
GS1920v2 Series User’s Guide
429
In the following example, switch A in the basement is the cluster manager and the other switches on the
upper floors of the building are cluster members.
Figure 307 Clustering Application Example
67.4.1 What You Can Do
• Use the Cluster Management Status screen (Section 67.5 on page 429) to view the role of the Switch
within the cluster and to access a cluster member Switch’s Web Configurator.
• Use the Cluster Management Setup screen (Section 67.6 on page 430) to configure clustering
management.
67.5 Cluster Management Status
Use this screen to view the role of the Switch within the cluster and to access a cluster member Switch’s
Web Configurator.
Click MAINTENANCE > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Cluster Manager The Switch through which you manage the cluster member
switches.
Cluster Members The switches being managed by the cluster manager Switch.
Table 239 Zyxel Clustering Management Specifications
To Next Page
Loading...
