Chapter 41 PPPoE
GS1920v2 Series User’s Guide
253
41.3 PPPoE IA Port
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the SWITCHING > PPPoE Intermediate Agent > PPPoE IA Port screen to display the screen as shown.
Figure 180 SWITCHING > PPPoE Intermediate Agent > PPPoE IA Port
The following table describes the labels in this screen.
Table 132 SWITCHING > PPPoE Intermediate Agent > PPPoE IA Port
LABEL DESCRIPTION
Port This field displays the port number. * means all ports.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
