ZyXEL Communications GS1920v2 Series - LLDP Remote Port Status Detail

Chapter 31 Link Layer Discovery Protocol (LLDP)
GS1920v2 Series User’s Guide
177
31.4.1 LLDP Remote Port Status Detail
This screen displays detailed LLDP status of the remote device connected to the Switch. Click PORT >
LLDP > LLDP > LLDP Remote Status and then click an index number, for example 1, in the Index column in
the LLDP Remote Status screen to display the screen as shown next.
Figure 120 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic TLV)
The following table describes the labels in Basic TLV part of the screen.
Port Description This displays a description for the port from which this LLDPDU was transmitted.
System Name This displays the system name of the remote device.
Management
Address
This displays the management address of the remote device. It could be the MAC address or
IP address.
Table 79 PORT > LLDP > LLDP > LLDP Remote Status (continued)
LABEL DESCRIPTION
Table 80 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic TLV)
LABEL DESCRIPTION
Local Port This displays the number of the Switch’s port to which the remote device is connected.
Basic TLV
Chassis ID TLV • Chassis ID Subtype – This displays how the chassis of the remote device is identified.
• Chassis ID – This displays the chassis ID of the remote device. The chassis ID is identified by
the chassis ID subtype.