Chapter 49 VLAN
GS1920v2 Series User’s Guide
299
The following table describes the labels in this screen.
49.3.1 VLAN Details
Use this screen to view detailed port settings and status of the static VLAN group. Click an index number
in the VLAN Status screen to display VLAN details.
Figure 212 SWITCHING > VLAN > VLAN Status > VLAN Status Details
Table 157 SWITCHING > VLAN > VLAN Status
LABEL DESCRIPTION
VLAN Search by
VID
Enter (an) existing VLAN ID numbers (use a comma (,) to separate individual VLANs or a hyphen
(-) to indicate a range of VLANs. For example, “3,4” or “3-9”) and click Search to display only the
specified VLANs in the list below.
Leave this field blank and click Search to display all VLANs configured on the Switch.
The Number of
VLAN
This is the number of VLANs configured on the Switch.
The Number of
Search Results
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the Search button to look for certain VLANs.
Index This is the VLAN index number. Click an index number to view more VLAN details.
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Name This fields shows the descriptive name of the VLAN.
Tagged Port This field shows the tagged ports that are participating in the VLAN.
Untagged Port This field shows the untagged ports that are participating in the VLAN.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
Static: added as a permanent entry.
To Next Page
Loading...
