ZyXEL Communications GS1920v2 Series - Static MAC Forwarding; Static MAC Forwarding Overview; What You Can Do; Configure Static MAC Forwarding

Chapter 48 Static MAC Forwarding
GS1920v2 Series User’s Guide
292
CHAPTER 48
Static MAC Forwarding
48.1 Static MAC Forwarding Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.
Use these screens to configure static MAC address forwarding.
48.1.1 What You Can Do
Use the Static MAC Forwarding screen (Section 48.2 on page 292) to assign static MAC addresses for a
port.
48.2 Configure Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch.
Click SWITCHING > Static MAC Forwarding in the navigation panel to display the configuration screen as
shown.
Figure 207 SWITCHING > Static MAC Forwarding