Chapter 31 Link Layer Discovery Protocol (LLDP)
GS1920v2 Series User’s Guide
190
Figure 130 PORT > LLDP > LLDP MED > LLDP-MED Location > Add/Edit
The following table describes the labels in this screen.
Table 90 PORT > LLDP > LLDP MED > LLDP-MED Location > Add/Edit
LABEL DESCRIPTION
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location Coordinates
The LLDP-MED uses geographical coordinates and Civic Address to set the location information of the remote
device. Geographical based coordinates includes latitude, longitude, altitude and datum. Civic Address includes
Country, State, County, City, Street and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º.
•north
•south
To Next Page
Loading...
