Chapter 50 VLAN Isolation
GS1920v2 Series User’s Guide
321
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Clear Click Clear to clear the fields to the factory defaults.
Cancel Click Cancel to not save the configuration you make and return to the last screen.
Table 175 SWITCHING > VLAN Isolation > Add/Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
Need help?
General
