Defining Wireless Coverage Areas 149
Setting Attributes for a Third-Party Access Point
1 In Miscellaneous group box on the Plan RF Coverage page, click the
Third-Party Access Point icon.
2 On the floor background image, click where you want the third-party
access point to be placed. The Create Third-Party AP wizard appears.
3 In the AP Model list, select one of the following:
■ AP (Dual Radio) — 802.11a and 802.11b or 802.11b/g
■ AP (Single Radio) — 802.11a, 802.11b, or 802.11g
4 Select one of the following: 11a, 11b, 11g.
The choices available depend on the selection you made in step 3.
5 In the Name box, type a name for the access point. You can use 1 to 32
characters, with no punctuation except the following: period (.), hyphen
(-), or underscore (_).
6 Optionally, in the Manufacturer ID box, type the manufacturer
identification for the access point (1 to 30 characters, with no spaces).
7 In the Product ID box, type the product identification for the access point
(1 to 30 characters, with no spaces).
To Next Page
Loading...
