Configuring WX Management Services 217
■ ClientAuthorization — Generated when a client is sucessfully
authorized.
■ ClientDeAssociation — Generated when a client is deassociated
from a radio.
■ ClientRoaming — Generated when a client roams.
■ AutoTuneRadioPowerChange — Generated when the
RF Auto-Tuning feature changes the power setting on a radio.
■ AutoTuneRadioChannelChange — Generated when the
RF Auto-Tuning feature changes the channel on a radio.
■ CounterMeasureStart — Generated when MSS begins
countermeasures against a rogue access point.
■ CounterMeasureStop — Generated when MSS stops
countermeasures against a rogue access point.
■ ClientDot1xFailure — Generated when a client experiences an
802.1X failure.
When a trap condition occurs, the WX sends an SNMP trap message to
any network management system specified as a trap receiver.
5 To add an SNMP trap receiver, click Add. The Create SNMP Target dialog
box appears.
6 In the IP Address box, type the IP address of the trap receiver.
To Next Page
Loading...
