424 CHAPTER 10: MONITORING THE NETWORK
Data Displayed When the Scope is a Switch, MAP, or Radio
When a WX switch, MAP access point, or individual radio is selected in
the organizer panel, the Client Monitor window’s Client Activity tab
displays a row of information for each client activity trap generated by the
selected device.
Table 34 lists the data displayed on the Client Activity tab when the scope
is a WX switch, MAP access point, or individual radio.
Dot1X Failures Number of times a client experienced 802.1X failures.
Common causes of 802.1X failures include the following:
■ A radio has already failed the client and the 802.1X
quiet period was in effect.
■ The authentication request sent to a RADIUS server on
behalf of the client timed out.
■ Bonded authentication is enabled and there was no
machine authentication session for client’s machine.
■ The username does not match an authentication rule’s
userglob for the requested SSID.
Associations Number of times a client associated with a radio on this
WX switch.
De-Associations Number of times a client de-associated from a radio on
this WX switch.
Roams Number of times a client roamed to a new MAP access
point, either on the same WX switch or another WX
switch.
Table 33 Client Activity Columns When Scope Is a Mobility Domain (continued)
Column Description
To Next Page
Loading...
