Using the Client Monitor Window 425
The Activity Details section at the bottom of the window displays details
for the selected row of information. The details differ depending on the
trap type. The following tables list the data displayed in the Activity
Details section for each trap type.
Table 34 Client Activity Columns When Scope Is a WX Switch, MAP, or Radio
Column Description
Event Type Type of SNMP trap:
■ Association Failure — ClientAssociationFailure trap
■ Authentication Failure — ClientAuthenticationFailure trap
■ Authorization Failure — ClientAuthorizationFailure trap
■ Authorization Successful — ClientAuthorization trap
■ Disassociation — ClientDeAssociation trap
■ Dot1x Failure — ClientDot1xFailure trap
■ Roam — ClientRoaming trap
Time System date and time on the WX switch when the 3WXM monitoring
service received the trap.
Client MAC MAC address of the client.
Client Name Username of the client.
Client IP
Address
IP address of the client.
SSID SSID the client was most recently associated with when the trap was
generated.
To Next Page
Loading...
