Using the Client Monitor Window 429
Auth Protocol Type 802.1X protocol used to authenticate the client:
■ EAP-TLS
■ MD5
■ NONE
■ PASS-THROUGH
■ PEAP
RSSI Strength of the signal received by the radio from the client.
Session ID ID used by 3Com equipment to track the session within the
Mobility Domain.
Client IP Address IP address of the client.
Session State State of the user session:
■ Associated — User is authenticated using an 802.11
protocol and associated with a MAP.
■ Authorizing — User is authenticated and is starting the
AAA authorization process.
■ Authorized — User is authorized.
■ Active — User is on the network.
■ Deassociated — User is disassociated from the MAP.
■ Roaming_away — User is roaming (a connection in the
new location is established).
■ Updated_to_roam — User is roaming. Session statistics
have been collected and will be transmitted to the new
location.
■ Web_authing — User is being authenticated by Web
AAA.
■ Wired — User is being authenticated using an 802.11
protocol on a wired authentication port.
■ Clearing — User session is being terminated.
■ Invalid — Usually indicates the session is being
terminated, and session information is no longer available.
Auth Server IP System IP address of the WX switch that was attempting to
authenticate the client.
Note — The system IP address is listed even if the switch was
using a RADIUS server to authenticate the client.
SSID SSID the client was requesting.
Client Location Mobility Domain, WX switch, MAP access point, and radio
that was dealing with the client.
Table 38 Activity Details for Authorization Successful (continued)
Column Description
To Next Page
Loading...
