3Com 3CRWX120695A - Page 430

430 CHAPTER 10: MONITORING THE NETWORK
Table 39 Activity Details for Disassociation
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
Client VLAN Name VLAN to which the client was assigned.
Auth Protocol Type 802.1X protocol used to authenticate the client:
■ EAP-TLS
■ MD5
■ NONE
■ PASS-THROUGH
■ PEAP
■ N/A
Client Location Mobility Domain, WX switch, MAP access point, and radio
that was dealing with the client.
Session ID ID used by 3Com equipment to track the session within
the Mobility Domain.
Client IP Address IP address of the client.
Auth Server IP System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID SSID the client was associated with.
Table 40 Activity Details for Dot1x Failure
Column Description
User Name Username of the client.
Auth Protocol Type 802.1X protocol used to authenticate the client:
■ EAP-TLS
■ MD5
■ NONE
■ PASS-THROUGH
■ PEAP
Client Location Mobility Domain, WX switch, MAP access point, and radio
that was dealing with the client.