Changing Monitoring Settings 553
Table 95 Sources of Monitor Data
3WXM Client Display Data Source Default
Event tab 3WXM client, for 3WXM client messages Enabled
Monitoring service, for monitoring service
messages
Enabled
Enable log monitoring option, for WX switch
messages
Disabled
Monitor tab — Explore
window
Status monitoring of WX switches by the
monitoring service
Enabled
Monitor tab — Status
Summary window
Status monitoring of WX switches by the
monitoring service
Enabled
Monitor tab — Client
Monitor window
Enable client session collection option Disabled
Collect client connection failure traps
option, which uses these SNMP traps received
by the monitoring service from monitored WX
switches:
■ ClientAssociationFailure
■ ClientAuthenticationFailure
■ ClientAuthorizationFailure
■ ClientDot1xFailure
Disabled
Collect client connection & roaming traps
option, which uses these SNMP traps received
by the monitoring service from monitored WX
switches:
■ ClientAuthorization
■ ClientDeAssociation
■ ClientRoaming
Disabled
Monitor tab—
RF Monitor window
Status monitoring of WX switches by the
monitoring service
(Does not apply to the Activity tab at the
bottom of the window)
Enabled
To Next Page
Loading...
