ABB ACL30 - Page 188

188 Parameters
02
02 I/O VALUES
Input and output signals of the drive.
All parameters in this group are read-only.
02.01 DI STATUS
Status word of the digital inputs.
Example: 000001 = DI1 is On, DI2 to DI6 are Off.
- / Pb
0b000000...
0b111111
Digital inputs status word 1 = 1 / -
02.02 RO STATUS
Status of the relay output. - / Pb
0b000...0b111 Relay outputs status word 1 = 1 / -
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
Bit Name Value Information
0 DI1 1 Digital input DI1 is On.
0 Digital input DI1 is Off.
1 DI2 1 Digital input DI2 is On.
0 Digital input DI2 is Off.
2 DI3 1 Digital input DI3 is On.
0 Digital input DI3 is Off.
3 DI4 1 Digital input DI4 is On.
0 Digital input DI4 is Off.
4 DI5 1 Digital input DI5 is On.
0 Digital input DI5 is Off.
5 DI6 1 Digital input DI6 is On.
0 Digital input DI6 is Off.
6 NOT USED
Bit Name Value Information
0 RO1 1 Relay output RO1 is energized.
0 Relay output RO1 is de-energized.
1 RESERVED
3 NOT USED