234 Parameters
20.02 MAXIMUM
CURRENT
Defines the allowed maximum motor current. - / Real
0.00…
30000.00 A
Maximum allowed motor current. - / 100 = 1 A
20.03 SPEED
TRIPMARGIN
Defines, together with 20.01 ABS MAX SPEED, the
maximum allowed speed of the motor (overspeed
protection). If the actual speed (01.01 SPEED ACT)
exceeds the speed limit defined by parameter 20.01
by more than this value, the drive trips on fault
OVERSPEED.
Example: If the maximum speed is 1420 rpm and
speed trip margin is 300 rpm, the drive trips at
1720 rpm.
500.0 rpm /
Real
0.0…
10000.0 rpm
Speed trip margin. - /
10 = 1 rpm
22
22 SPEED
FEEDBACK
Settings for speed feedback selection, zero speed
selection, actual speed supervision, etc.
22.01 SPEED FB SEL
Selects the speed feedback value used in control. Enc speed /
enum
Estimated Calculated speed estimate. 0
Enc speed Actual speed measured with encoder. The encoder is
selected by parameter 90.01 ENCODER SEL.
1
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
20.03 SPEED TRIP MARGIN
20.03 SPEED TRIP MARGIN
Speed
Time
20.01 ABS MAX SPEED
20.01 ABS MAX SPEED
To Next Page
Loading...
