266 Parameters
80.20 SPEED2 OFF DLY
Defines the time period for extending the speed2
reference (parameter 80.17 SPEED2). Speed2 is
used further for the duration of this time period, even
if it was deactivated by the speed reference selection
bits.
0.0 s / Real
0.0…5.0 s Speed2 off-delay. 10 = 1 s
80.21 MED SPD OFF DLY
Defines the time period for extending the medium
speed reference (parameter 80.14 MEDIUM
SPEED). The medium speed reference is used
further for the duration of this time period, even if it
was deactivated by the speed reference selection
bits.
0.0 s / Real
0.0…5.0 s Medium speed off-delay. 10 = 1 s
80.22 NOM SPD OFF DLY
Defines the time period for extending the nominal
speed reference (parameter 72.01 NOMINAL
SPEED). The nominal speed reference is used
further for the duration of this time period, even if it
was deactivated by the speed reference selection
bits.
0.0 s / Real
0.0…5.0 s Nominal speed off-delay. 10 = 1 s
80.23 SPEED3 OFF DLY
Defines the time period for extending the speed3
reference (parameter 80.18 SPEED3). Speed3 is
used further for the duration of this time period, even
if it was deactivated by the speed reference selection
bits.
0.0 s / Real
0.0…5.0 s Speed3 off-delay. 10 = 1 s
81
81 SUPERVISION
Parameters related to speed match, motor stall and
leveling overtime stop. See also section Protection
functions on page 155.
81.01 SPEED MATCH
DISABLED /
enum
DISABLED Speed match function disabled. 0
ENABLED Speed match function enabled. 1
81.02 SPD STD DEV LVL
Defines the absolute speed deviation level for the
steady state. See also parameter 81.04 SPEED
MATCH DLY.
0.10 m/s /
Real
0.00…10.00 m/s Steady state speed deviation level. 100 = 1 m/s
81.03 SPD RMP DEV LVL
Defines the absolute speed deviation level for the
ramp state (during acceleration/deceleration). See
also parameter 81.04 SPEED MATCH DLY.
0.20 m/s /
Real
0.00…10.00 m/s Ramp state speed deviation level. 100 = 1 m/s
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
To Next Page
Loading...
Need help?
General
