Demonstration program | Clearing the program
9
9.8 Clearing the program
If a program is loaded, and saved, it does not have to be
cleared to open a new program.
To clear a program:
Press the DRO/PGM key to return to PGM mode
Press the Clear Program soft key
Press the Yes soft key to confirm clearing the program
The program is cleared from the screen, at any time another
program can be loaded or a new program written
If for some reason a program cannot be cleared with the Clear
Program soft key, there is an alternate method.
Cycle the power to the console
While at the DRO mode home screen, prior to finding home,
press and hold the CLEAR key for 5 seconds
Follow the instructions to clear the current program
158
ACU-RITE | TURNPWR | User's Manual | 08/2020
To Next Page
