Simulators for Windows PCs | Simulator for Windows PCs
14
14.1 Simulator for Windows PCs
Overview
The control simulation software provides a convenient way to write
part programs and simulate machine behavior using a standard
Windows computer. Features and functionality are virtually identical
to that of the control itself.
System requirements
Platform: IBM compatible PC
Operating System: All 32-bit and 64-bit editions of ** Windows
7/8/8.1/10 are supported
Available Drive Space: 2 GB or higher
Memory: 2 GB or higher
Display Resolution: 1024x768 (XGA) or higher required. 1440 x
900 (WXGA+) recommended
Ports: One available USB connection for protection device
Peripherals: Keyboard and pointing device.
**Microsoft, Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
186
ACU-RITE | TURNPWR | User's Manual | 08/2020
To Next Page
