Fundamentals | Control model
1
1.2 Control model
This manual describes functions and features provided by the
control as of the following NC software number.
Control model NC software number
ACU-RITE
®
TURNPWR 751006-01
The machine tool builder may not allow some of the functions
described in this manual, therefore they may not be among the
features provided by the control on your machine tool.
The machine tool builder representative can assist you with
becoming familiar with the features of the machine.
Many machine manufacturers, as well as HEIDENHAIN
Corporation, offer programming courses for the control. We
recommend these courses as an effective way of improving your
programming skill and sharing information and ideas with other
users.
Installation Instructions:
ID: 1266125-xx or 1302521-xx
If you need one of these Installation Manuals, please
contact HEIDENHAIN.
Installation Manual Kit Style for AC Motors:
ID: 1247975-xx
If you need this Installation Manual, please contact
HEIDENHAIN.
Technical Manual:
ID: 1034383-xx
If you need this Technical Manual, please contact
HEIDENHAIN.
Intended place of operation
The control is intended for use primarily in industrially-zoned
areas. Refer to the respective installation manual for additional
information.
New functions of software
751006-01
Changed functions of software
751006-01
16
ACU-RITE | TURNPWR | User's Manual | 08/2020
To Next Page
Loading...
