Program edit mode | Program management
Copy and paste programs
Press the Program Functions soft key
Press the Change Window soft key to select the folder tree
window
Repeat to select the Folder Contents window
While copying, moving, or deleting a large number of
files a dialog will appear to display the progress. At
this time a cancel key will be available to cancel the
operation.
Use the Arrow keys to highlight the program to be copied, then
press the Select soft key
A popup menu will open where either the highlighted program
can be selected, or all programs in the folder can be selected
Highlight Select, or Select All, then press the ENTER key
If the program that was selected is not the correct one, select
the Clear feature, and press ENTER
The program is de-selected, and another program can now be
selected
Press the Function soft key
Select Copy from the popup menu
Press the ENTER key
Press the Function soft key again
Select Paste from the popup menu
Press the ENTER key
A copy of the selected program has now been copied to the
same folder and was named with a suffix of “Copy”. Another
folder location could have been chosen, before Paste, to copy the
program to the new location.
If a program is copied multiple times using the Paste function, each
pasted program copy would then have sequential numbering (e.g.
Copy, Copy (2), Copy (3), and so on).
5
ACU-RITE | TURNPWR | User's Manual | 08/2020
81
To Next Page
Loading...
