Programming Commands U511 User’s Manual
5-54 Aerotech, Inc. Version 1.1
5.5.43. JOG
The JOG command calls the Jog screen from a program. When this occurs, the program
execution pauses and the Jog screen appears so the operator can jog the axes. The user
presses the Quit button in the Jog screen to return to the program.
SYNTAX:
JOG
JO
There are no arguments needed with the JOG command.
EXAMPLE:
ENABLE XY
HOME XY
:
JOG
:
Related commands
FREERUN
5.5.44. Label Marker (:)
A label is an ASCII string that may be used to define an entry point within a program.
The label command must occupy it’s own program block.
SYNTAX:
:label
label Specifies an ASCII string, up to 8 characters in length.
EXAMPLE:
:SECT1 ;Inserts the label "SECT1" into the program. Label names
;are arbitrary. Label markers may be used as an entry
;point for a GOTO or SUBROUTINE command
Related commands
GOTO, SUBROUTINE, IF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
