Aerotech UNIDEX 511 - SKEY (Soft Keys)

Programming Commands U511 User’s Manual
5-80 Aerotech, Inc. Version 1.1
5.5.71. SKEY (Soft Keys)
The SKey command is used to reprogram the function keys located on the front panel.
SYNTAX:
SKey SEt fKey, type, label, text
fKey Function key to reassign ( 1 - 5 ).
type 1 = Goto label, no abort
2 = Subroutine label, no abort
3 = Parts program, no abort
4 = Goto label, abort motion
5 = Subroutine label, abort motion
6 = Parts program, abort motion
label Label to jump to when function key hit.
text Text to place on function key (≤ 8 characters)
SKey GEt Waits for a valid function key to be pressed.
SKey ENable fKeyA(,fKeyB,fKeyC,...)
Enables a function key.
fKeyA Function key to enable (1 - 5).
fKeyB,... Optional function keys to enable.
SKey DIsable fKeyA(,fKeyB,fKeyC,...)
Disables a function key.
Arguments same as SKey ENable.
SKey UNdef fKeyA(,fKeyB, fKeyC,...)
Returns the function key to the original function as set in
the MMI software.
Arguments same as SKey ENable.
EXAMPLES:
SKey SEt 3,1,:cut, Cut Part
;Set key F3 to jump to :cut when hit, button text =
;“Cut Part”
SKey UN 3 ;Undefined F3, returns F3 back to original function
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com