U511 User’s Manual Introduction
Version 1.1 Aerotech, Inc. 1-3
1.2. Ordering Information
Table 1-1 lists U511 series options that are available from Aerotech, Inc. For complete
ordering information, refer to the Aerotech Motion Control Catalog.
Table 1-1. Basic Motion Controllers
Controller Description
U511x-y-v1-0 One-to-two axis UNIDEX 511 with integral power supply and
interconnection panel for all signals
U511x-y-v1-v2 Three-to-four axis UNIDEX 511 with integral power supply and
interconnection panel for all signals
* Specify package style "x" as follows:
S = Desktop
R = Rack mount
Specify AC power "y" as follows:
A = 115 VAC
B = 230 VAC
C = 100 VAC
D = 208 VAC
Specify DC bus voltage "v1" and “v2” as follows:
30 = ±30 VDC
40 = 40 VDC
80 = 80 VDC
160 = 160 VDC
Table 1-2 lists the Aerotech motor drivers that can be used with the UNIDEX 511.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
