U511 User’s Manual Introduction
Version 1.1 Aerotech, Inc. 1-5
1.4. Safety Procedures and Warnings
The following statements apply wherever the Warning or Danger symbol appears within
this manual. Failure to observe these precautions could result in serious injury to those
performing the procedures and/or damage to the equipment.
To minimize the possibility of electrical shock and bodily injury, make certain that
the mains power supply is disconnected before opening the chassis.
To minimize the possibility of electrical shock and bodily injury, make certain that
all of the electrical power switches are in the off position prior to making any
electrical connections.
To minimize the possibility of electrical shock and bodily injury when any electrical
circuit is in use, ensure that no person comes in contact with the circuitry.
When this controller is installed within a system, mechanical motion will occur. Care
must be exercised that all personnel remain clear of any moving parts.
To minimize the possibility of bodily injury, make certain that all electrical power
switches are in the off position prior to making any mechanical adjustments.
∇ ∇ ∇
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
