Appendix
U511 User’s Manual
E-2 Aerotech, Inc. Version 1.1
filename This is the filename to be stored in backup memory (option
“b”) or restored from backup memory (option “r”). The
filename should be in standard DOS format using a
maximum of 8 characters for the file name and a three
character file extension (i.e., filename.nam).
EXAMPLE
backup b 12345.prm ;this will backup the parameter file 12345.prm
backup r 12345.prm ;this will restore the parameter file 12345.prm to the
;“B” drive
To modify the system default parameter values, use the restore option to place a custom
*.prm file into memory bank number 1, and/or to place a custom *.cfg file into bank
number 2. The values from these custom files will then be used for system defaults and
will be used to replace missing parameter files from the “B” drive. Other files, such as
user programs may be stored in banks 3 through 10.
The backup memory is allocated in the flash memory sector containing DOS.
Reloading DOS on the UNIDEX 511, will overwrite all files in backup memory. It
may be necessary to restore all important files to the “B” drive before reloading
DOS.
∇ ∇ ∇
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
