1100 Series Nano Pump Service Manual 233
Control Module Screens for the Nano Pump 6
Screens available from the Analysis view
Analysis view This is the wake-up screen, if the Agilent 1100 capillary pump is the only
configured Agilent 1100 module. It is used to enter the most common pump
method parameters.
The m-key allows access to the context sensitive menus. Date&Time allows
you to change time settings. Print Screen gives access to the print screen.
About tells you the current firmware revision and the serial# of your control
module. Setup view leads you to analysis view configuration for additional
Agilent 1100 modules. Restart re-boots the control module.
To Next Page
Loading...
