Agilent Technologies 1100 Series Service Manual

1100 Series Nano Pump Service Manual 7
Installing the Pump 1
Optimizing the Stack Configuration
If your nano pump is part of a complete 1100 series system, you can ensure
optimum performance by limiting the configuration of the system stack to the
following configuration. This configuration optimizes the system flow path,
ensuring minimum delay volume.
NOTE
If a single stack configuration becomes too high, e.g. if an additional module like a G1330B
ALS Thermostat is added or if your bench is too high, a two stack configuration may be a
better setup. Separate the stack between pump and sampler and place the stack containing
the pump on the right side of the stack containing the sampler.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English