1100 Series Nano Pump Service Manual 5
Installing the Pump 1
Unpacking the Nano Pump
Damaged Packaging
Upon receipt of your nano pump, inspect the shipping containers for any signs
of damage. If the containers or cushioning material are damaged, save them
until the contents have been checked for completeness and the nano pump has
been mechanically and electrically checked. If the shipping container or
cushioning material is damaged, notify the carrier and save the shipping
material for the carrier’s inspection.
Delivery Checklist
Ensure all parts and materials have been delivered with the nano pump. For
this compare the shipment content with the checklist included in the
instrument box. Please report missing or damaged parts to your local Agilent
Technologies sales and service office.
Accessory Kit
Each shipment contents an accessory kit with the necessary tools to install
the pump and to have an operating system.
If there are signs of damage to the nano pump, please do not attempt to install the
nano pump.
Table 2 Nano Pump Accessory Kit Content G2226-68705
Description Part Number
Insert tool 01018-23702
SST Solvent inlet filter (x4) 01018-60025
Waste tube (2 m) 0890-1760
SST replacement frit (0.5 µm) 5022-2185
Wrench open end 7/16 - 1/2 inch (x 2) 8710-0806
To Next Page
Loading...
Need help?
General
