Agilent Technologies 1100 Series Service Manual

1100 Series Nano Pump Service Manual 27
Troubleshooting and Test Functions 2
Time-out
The time-out threshold was exceeded.
Probable Causes
• The analysis was completed successfully, and the time-out function
switched off the nano pump as requested.
• A not-ready condition was present during a sequence or multiple-injection
run for a period longer than the time-out threshold.
Suggested Actions
✔ Check the logbook for the occurrence and source of a not-ready condition.
Restart the analysis where required.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English