Agilent Technologies 1100 Series Service Manual

244 1100 Series Nano Pump Service Manual
6 Control Module Screens for the Nano Pump
Method screens
On the Analysis screen use the F3-key (Method) to view the parameters in a
method. Use the F8-key (Save As) to save the method in the module(s). The
PC-Card-key (F2) is only active when a PCMCIA card is inserted in the control
module.
Use F2-key (PC-Card) to transfer a method from/to a PCMCIA card. Use the
Right/Left selection keys to switch between PC-Card and Instrument window.
Use the Up/Down selection keys to select the method. Use the F7/F8-keys
(Copy) or Enter to move available methods between PCMCIA card and
Modules. F6 Deletes a selected method.
NOTE
The PCMCIA card is only recognized, if inserted before last start-up.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English