1100 Series Nano Pump Service Manual 243
Control Module Screens for the Nano Pump 6
Press F6 (Select) to configure online signals (maximum are 3). Additional
signals can also be chromatograms or temperature signals from other
modules. Use the Right/Left selection keys to switch between ‘Available
Signals’ and ‘Selected Signals’. Use the F8-key (Move) or Enter to move
available signals into the box for selected signals or vice versa. Use F7 to Setup
ranges for each individual (highlighted) signal. Press F6 (Done) to activate the
changed settings and to return to the Plot screen.
To Next Page
Loading...
