1100 Series Nano Pump Service Manual 19
Installing the Pump 1
To clean the system when using buffers Bidistilled water Best solvent to re-dissolve salts
After a solvent change Bidistilled water Best solvent to re-dissolve salts
After the installation of normal phase seals
(P/N 0905-1420)
Hexane +
5% Isopropanol
Good wetting properties
To clean the capillaries Acetone Best solvent to remove impurities from the
capillaries
Table 4 Choice of Priming Solvents for Different Purposes, continued
Activity Solvent Comments
To Next Page
Loading...
