14 Biochemical Analysis Software for Agilent ChemStation
2 Kinetics Mode
Setting Up your Spectrophotometer
Select the Instrument menu of the biochemical analysis software to setup your
Agilent 8453 spectrophotometer for a time-based measurement.
Choose Setup Spectrophotometer… to display the Instrument Parameters
dialog box, which allows you to set the run-time parameters for the
spectrophotometer. In this dialog box you can set the following parameters.
• You can use the fields to specify lower and upper limits of the range
required by your analysis. The From field defines the lower limit of the
range, the To field defines the upper limit of the range. The default values
are the wavelength range limits of the configured spectrophotometer.
It is recommended to use the maximum wavelength range of your spectrophotometer. This
enables you to use the full benefits of the diode array spectrophotometer, for example, post
run data evaluation at different wavelengths.
To Next Page
Loading...
