Understanding Your Agilent ChemStation 263
System Verification
12
The GLPsave Register
The GLPsave Register
The GLPsave register is saved at the end of each analysis when selected in the
run time checklist. It contains the following information:
• signals,
• logbook,
• integration results table,
• quantification results table,
• instrument performance data, and
• data analysis method.
This register is a complete protected record, generated at the time of analysis.
You can recall it at any time in the future as proof of your analytical methods.
The GLPsave Register option in the Data Analysis view enables you to review
the GLPsave register file at any time. The file is protected by a checksum and
is encoded into binary to ensure it is not changed.
In the dialog box used to select the GLPsave register for review, you can choose
your review options from the following:
• load original method,
• load original signals,
• load instrument performance data,
• print original method,
• print original integration results,
• print original quantification results, and
• generate original report from the original method and signals.
You can use the GLP review function to show that chromatographic data are
original, prove the quality of the analysis from the instrument performance
data, and demonstrate the authenticity of the data interpretation.
For example, you can:
To Next Page
Loading...
