66 Understanding Your Agilent ChemStation
3 Data Acquisition
Status Information
System Diagram
If supported by the configured analytical instruments (for example, for the
Agilent 1100/1200 Series modules for LC or the Agilent 6890 Series GC) you
can display a graphical system diagram for your ChemStation system. This
allows you to quickly check the system status at a glance. Select the System
Diagram item from the View menu of the Method and Run Control View to
activate the diagram. It is a graphical representation of your ChemStation
system. Each component is represented by an icon. Using the color coding
described below the current status is displayed.
In addition, you can display listings of actual parameter settings. Apart from a
status overview, the diagram allows quick access to dialog boxes for setting
parameters for each system component.
See the instrument part of the online help system for more information on the
system diagram.
Table 8 System diagram color coding
Color Status
gray inactive or off
yellow not ready
green ready
blue run
red error
To Next Page
Loading...
