188 Understanding Your Agilent ChemStation
8 Automation
Cyclic Multiple-Level Calibration Sequences
Method B Analysis Order
This section describes the analysis order for Method B, which is the second
part of the two-method sequence.
Method B has the following differences compared with Method A:
• There are two injections per vial for calibration level 2. The Interval entry is
set to 3.
7 Method A 12 Sample analysis and report
8 Method A 13 Sample analysis and report
9 Method A 1 Calibration level 1 and report
10 Method A 2 Calibration level 2 and report
11 Method A 14 Sample analysis and report
Table 1 8 Method A Analysis Order
Table 1 9 Method B Analysis Order
Inj No. Method Vial Operation
12 Method B 3 Calibration level 1 and report
13 Method B 5 Calibration level 2 and report
14 Method B 5 Calibration level 2 and report
15 Method B 20 Sample analysis and report
16 Method B 21 Sample analysis and report
17 Method B 22 Sample analysis and report
18 Method B 3 Calibration level 1 and report
19 Method B 5 Calibration level 2 and report
20 Method B 5 Calibration level 2 and report
21 Method B 23 Sample analysis and report
22 Method B 24 Sample analysis and report
To Next Page
Loading...
Need help?
General
