AMP EFI MS3Pro - CAN Receiving; CAN VSS, Gear; Can Ego, Gps

To Next Page

To Previous Page

7.10 CAN bus / Testmodes 7 ADDITIONAL ITEMS: BEYOND BASIC FUEL AND IGNITION CONTROL

7.10.5 CAN receiving

Allows MS3Pro to receive certain types of CAN data. Consult the documentation for your CAN device as to how

to conﬁgure this.

7.10.6 CAN VSS, gear

These settings are for third party CAN enabled devices that provide the MS3Pro with speed, or gear information.

Refer to your device’s documentation for how to conﬁgure it with the MS3Pro.

7.10.7 CAN EGO, GPS

The MS3Pro can also receive O

sensor, accelerometer, and GPS data over CAN. It supports the following devices.

AMP EFI MS3Pro manual version 1.202, ﬁrmware 1.5.0, 4/21/2017 Page 264