Anritsu MT8820C - Page 18

18
Table 1.1.2.8-1 LTE-Advanced FDD/TDD UL CA Measurement Software (Cont’d)
Occupied Bandwidth
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
Adjacent Channel
Leakage Power
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
Spectrum Emission
Mask
Same as MX882112C at CC or Contiguous CC measurements. The
measurement target is only PUSCH.
RF Signal Generator
Output frequency 400 to 3800 MHz (1-Hz steps)
3800 to 6000 MHz (1-Hz steps)
(Can be used when installing MT8821C-019 option)
Throughput
Measurement
Function Throughput measurement using RMC
Measurement target ACK and NACK reported from UE
1.1.2.9. MX882112C/13C-026
Table 1.1.2.9-1 LTE-Advanced FDD/TDD DL CA IP Data Transfer
Item
Specifications
Function
At DL CA, IP data transfer is supported by using the internal server of the
MT8821C, or IP data transfer with external devices is supported by using the
Ethernet port of the LTE measurement hardware.