Chapter 4 Importing Images 95
I
Importing a Selection of Images
You can also import a selection of images from your camera or card reader.
To import a selection of images:
1 Connect your camera or card reader to your computer.
The Import panel and Import dialog appear, showing the images on the camera or card.
2 In the Projects panel, do one of the following:
 Choose File > New Project (or press Command-N) to create a new project.
 Select an existing project to hold your images. (The Import arrow points at the
selected project.)
The top-left portion of the Import dialog updates, displaying where the images are
being placed.
3 Select the images you want to import by Shift-clicking to select a range of adjacent
images, Command-clicking to select nonadjacent images, or dragging a selection
rectangle around the images you want.
The current number of images selected for import is displayed on the Import button in
the lower-right corner of the dialog.
To reset the image selection so that no images are selected, click in the background
beside a thumbnail.
If necessary, adjust the size of the thumbnails by dragging the Thumbnail Resize slider
at the bottom of the dialog.
Import button showing
the number of images
selected for import
To Next Page
Loading...
